Check physiscal disk or raid status in HP servers

13 viewsLinux
0

HP Smart Storage Administrator CLI (hpssacli)/ HP Array Controller utility CLI (hpacucli)  is a command line-based disk configuration program that helps to manage, configure, diagnose and monitor HP smart Array controllers.

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_d6ebba0f5cd642edace4648b9a

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04bffb688a73438598fef81ddd

Package name :- hpssacli-*.rpm  or  hpacucli-*.rpms

 

[root@XXXXXXXX ~]# hpssacli ctrl all show config

Smart Array P440ar in Slot 0 (Embedded) (sn: PDNLH0BRH9PLLX)
12G SAS Exp Card at Port 1I, Box 1, OK

array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (1.1 TB, RAID 1, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 1200.2 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 1200.2 GB, OK)

[root@XXXXXXX ~]# hpssacli ctrl slot=0 pd all show detail

Smart Array P440ar in Slot 0 (Embedded)

array A
physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS

Check Array Controllr details

Smart Array P440ar in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
Serial Number: PDNLH0BRH9PLLX
Cache Serial Number: PDNLH0BRH9PLLX
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: B
Firmware Version: 1.14

Asked question